iron arc
英 [ˈaɪən ɑːk]
美 [ˈaɪərn ɑːrk]
网络 铁电弧; 铁弧
双语例句
- The Bishop knelt before this curtain as he passed and said a brief prayer. The iron rod support the valance be bend in an arc
主教走过帷布跟前，跪下去做了一回短短的祈祷。挂窗帘上部短幔的铁棍弯成了个弓形 - Microstructure and Properties of Iron Based Carbon Arc Surfacing Layer Applied Magnetic Field
外加磁场作用下铁基碳弧堆焊层的组织和性能 - Characteristic of direct reduced iron and its present status in service in electric arc steelmaking Changcheng Company had been summarized, its effect has been analyzed further.
概述了直接还原铁的特性及在我厂电弧炉炼钢中的使用情况，并将其效果作了进一步分析。 - Results proved that grey cast iron surface is strengthened with many kinds of ways by TIG arc local remelting treatment, especially through surface alloying ha.
针对提高铸铁耐磨性的问题，介绍了用TIG电弧对涂敷合金元素的灰铸铁表面进行局部重熔处理时，合金种类及合金加入量对试样表面性能的影响。 - Studies of Carbon-Coated iron Nanoparticles Grown by Arc Discharge
碳弧法制备碳包铁纳米颗粒的研究 - Investigation on Surface Hardening of Cast Iron by Tungsten Inert Gas Arc Remelting
铸铁表面钨极氩弧重熔强化的研究 - Effects of SG Inoculant and Trace Bi on the Weldability of Ductile Cast Iron in Arc Cold Welding
SG及微量Bi对球铁电弧冷焊时焊接性能的影响 - Carbon-coated iron nanoparticles synthesized by DC carbon arc discharge method
直流碳弧法合成碳包铁纳米粒子的研究 - The carbon-coated iron nanoparticles were produced by using DC carbon arc discharge method and characterized by transmission electron microscopy and X-ray diffraction ( XRD).
用直流碳弧法制备碳包铁纳米粒子，通过X射线衍射（XRD）、透射电镜（TEM）等分析手段对粒子的成分、形貌等进行表征； - Study on Iron Base Arc Spraying Cored Wire with TiC Ceramic Powders
铁基含TiC陶瓷粉电弧喷涂粉芯丝材的研究 - Now in our country the wear resistant surfacing material studied 、 utilized and made is Fe-Cr-C 、 Fe-Cr-B and high chromium cast iron alloy system and powder Cobalt and Nickel-based alloys used in plasma arc.
我国当前研制应用于生产的耐磨堆焊材料大部分是沿用过去的铁铬碳系，铁铬硼系，高铬铸铁合金系统和等离子弧用的粉末钴基、镍基材料[1]。 - Using the composite graphite rods with the sulphide of iron group metals as anode, the double-wall carbon nanotubes have been fabricated by arc discharging under hydrogen atmosphere.
用含有铁族金属硫化物的复合石墨棒作阳极，在氢气氛围下实施电弧放电，制备出了双壁纳米碳管。 - Practice of Sorbitic High Strength Spheroidal Graphite Iron Roller by Electric Arc Furnace Melting
电弧炉熔炼索氏体高强度球铁轧辊的实践 - Iron base composite coatings were deposited on mild steel substrate by arc spraying using cored wire with TiC ceramic powders.
采用电弧喷涂含TiC陶瓷粉末的粉芯丝材，在低碳钢基体上制备了铁基复合涂层。 - This paper analyses and studies the methods for measuring inductance of the iron core DC reactor of CO_2 arc welding power source. It points out that the existing methods are not accurate enough to avoid errors of measurement.
本文对CO2焊接电源直流铁芯电抗器电感值的测试方法进行了分析研究，指出现有的方法测试误差较大。 - Application Experiment of Sponge Iron in Electric Arc Furnace
海绵铁在电炉上的应用试验 - Under the same conditions the partition ratio of concentration of sulphur in slag to that in iron arc much less in desulphurization than that in sulphurization.
在相同的条件下，硫在渣铁中的分配系数，脱硫过程的小，硫化过程的大，证明炉渣具有很大的吸硫潜力。 - The main achievements and problems of minicomputer application in iron and steel industry in recent years are described. Policies and measures to develop a new aspect of minicomputer application in iron and steel industry arc also discussed.
本文叙述了近年来钢铁工业微型机应用的主要成效和存在的问题，并讨论了开创钢铁工业微型机应用新局面的若干政策和对策。 - Preparation of Carbon-coated Iron Carbide Nanocrystals by Using AC Carbon Arc Discharge Method
交流碳弧法合成碳包碳化铁纳米晶 - The effects of Al element and welding temperature on the structure of welding zone obtained by Ca Ni Ti Bi multi alloying cast iron homogeneous electrode for arc cold welding were studied under producing condition. Then the welding technological properties of the electrode were observed and evaluated.
在生产条件下，研究了铝粉的加入量及焊接温度对多元微合金化铸铁电弧冷焊同质焊条所获得的焊补区组织和性能的影响，观察评估了焊条的焊接工艺性能。 - Preparation of Carbon-coated Iron Nanoparticles by Hydrogen Arc Plasma Method
氢电弧等离子体法制备碳包铁纳米粒子 - Studies were made for the effect of alloy composition and water atomisation on high chromium iron powder for plasma transferred arc surfacing.
本文对等离子喷焊用高铬铸铁粉末的合金成分和水雾化制粉工艺进行探讨。 - High chromium iron powder for plasma transferred arc surfacing
等离子喷焊用高铬铸铁粉末 - This paper, from the technological perspective, analyzes the causes of displacement over-voltage of neutral points, break-line over-voltage, iron magnetic resonant over-voltage& arc over-voltage, and proposes more than two technical solutions to these problems.
本文首先从技术角度分析中性点位移过电压、断线过电压、铁磁谐振过电压和弧光过电压产生的原因，然后提出两种解决以上问题的技术措施。 - Effect of Welding Material on Machining Property of Gray Cast Iron Joints by Cold Arc Welding
焊材对灰铸铁电弧冷焊接头加工性的影响 - Laboratory Test on Charging Molten Iron into Electric Arc Furnace
电弧炉兑铁水冶炼工艺的试验研究 - On technological method of cast iron back-welding by electric-arc cold welding
电弧冷焊在铸铁补焊中的工艺方法 - Yamansu iron deposit is located near continental crust of the island arc zone.
矿床位于岛弧带近陆壳一侧。 - A highly effective method for preparation of carbon-coated iron carbide nanocrystals by AC carbon arc discharge was studied, the yield of magnetic micro powder was over 90%.
采用交流碳弧法高效合成碳包碳化铁纳米晶磁性微粉，磁性微粉产率达90%以上。 - Quality Control of Scrap and Iron Unit used in Electric Arc Furnace
电炉用钢铁料的质量控制